If you are unable to visualize any information click here to go online

 

 

STAIDTREAT® KIT BOX System

The STAIDTREAT® is an innovative modular system designed to aesthetically conceal the acoustic treatment in its room and make it. The finishing plate is similar for the three options and conceals the imperceptible. The STAIDTREAT® consists of three different models remaining engineering portion of each model. This pressed mineral with very different acoustic features, namely: STAIDTREAT® BXA, granulate plate also combines the absorption and unidirectional BXW and WBA. micro-diffusion features.

The different specificities of each model provide as a whole an This range of panels is particularly meant for small and medium-sized outstanding acoustic balance. Thus, the resulting aesthetic look is a rooms, ranging from studios to conference rooms and small light, sober and very pleasant design. auditoriums.

  DOWNLOAD BROCHURE

.
  • HI-FI ROOMS
  • HOME STUDIOS
  • INSTRUMENTS ROOMS
  • HOME THEATRES
  • LISTENING ROOMS
  • HOME CINEMAS
 
 


Features:

The JOCAVI® KIT BOX 01 has been created for small-sized home-cinema rooms, home-studios and rehearsal rooms. The acoustic treatment modules must also be placed in relation to the listener and the speakers, while minimizing the SBIR (speaker-boundary interference response) and the modal emphasis to produce a frequency response as flat as possible in the room. Give your ears an opportunity and see how the performance of your sound system improves. All packs are supplied with assembly instructions, as well as the glues and tools which are necessary to apply the acoustic modules.

Where to apply:

Rooms with an area between: 13 and 17 square meters.
Rooms with volumes between: 35 and 45 cubic meters.
For use in small-sized home-theatre rooms, home-studios, Hi-fi rooms or instrument rooms.


Graphic

RT (s)
1,0
0,8
0,6
0,4
0,2
0
 
63 Hz
125 Hz
250 Hz
500 Hz
1 K
2 K
4 K
8 K
           
Freq (Hz)

 

63 Hz
125 Hz
250 Hz
500 Hz
1 K
2 K
4 K
8 K
0.48
0.44
0.43
0.52
0.53
0.47
0.47
0.49

Sabine: 0.48 sec


Acoustic features:

These values were obtained by simulation in specific JAS® software and later confirmed through acoustic analyses in the rooms. The simulated rooms were tested with all the materials and equipments shown in the images, and the mentioned JOCAVI®KIT BOX 01 acoustic panels.

Traditional construction room with the following features:

Dimensions: (L,W,H): 4.31m / 3.58m / 2.80m.
Walls: masonry with painted fine stuff and a wooden door.
Ceiling: 12 mm - thick plaster.
Floor: natural floating parquet.


KIT BOX 01 QUANTITIES:

Reference Panels
Units
Absorbent
Tuned
BXA060 Staidtreat®BXA
12
-
V
BXW060 Staidtreat®BXW
9
-
V
WBA060 Staidtreat®WBA
12
V
-


 


Features:

 The JOCAVI® KIT BOX 02 has been created for small-sized home-cinema rooms, home-studios and rehearsal rooms. The JOCAVI® KIT BOX 02 approach consists in adjusting the room dimensions to sizes which are slightly bigger than those of JOCAVI® KIT BOX 01. The acoustic treatment modules must also be placed in relation to the listener and the speakers, while minimizing the SBIR (speakerboundary interference response) and the modal emphasis to produce a frequency response as flat as possible in the room. Give your ears an opportunity and see how the performance of your sound system improves. All packs are supplied with assembly instructions, as well as the glues and tools which are necessary to apply the acoustic modules.

Where to apply:

Rooms with an area between: 17 and 24 square meters.
Rooms with volumes between: 45 and 58 cubic meters.
For use in small-sized home-theatre rooms, home-studios, Hi-fi rooms or instrument rooms.


Graphic

RT (s)
1,0
0,8
0,6
0,4
0,2
0
 
63 Hz
125 Hz
250 Hz
500 Hz
1 K
2 K
4 K
8 K
           
Freq (Hz)

 

63 Hz
125 Hz
250 Hz
500 Hz
1 K
2 K
4 K
8 K
0.50
0.48
0.57
0.56
0.50
0.47
0.49
0.51

Sabine: 0.51 sec


Acoustic features:

These values were obtained by simulation in specific JAS® software and later confirmed through acoustic analyses in the rooms. The simulated rooms were tested with all the materials and equipments shown in the images, and the mentioned JOCAVI® KIT BOX 02 acoustic panels.

Traditional construction room with the following features:

Dimensions: (L,W,H): 5,82m / 4,00m / 2,50m.
Walls: masonry with painted fine stuff and a wooden door.
Ceiling: 12 mm - thick plaster.
Floor: natural floating parquet.


KIT BOX 02 QUANTITIES:

Reference Panels Units
Absorbent
Tuned
BXA060 Staidtreat®BXA
12
-
V
BXW060 Staidtreat®BXW
12
-
V
WBA060 Staidtreat®WBA
18
V
-


 

The Same Finishings, Different Acoustic Performances

STAIDTREAT® BXA
Corner Bass Trap 		STAIDTREAT® BXW
Wall Bass Trap 		STAIDTREAT® WBA
Wall Mid Range Absorbent
The STAIDTREAT® BXA is a low-frequency absorbent panel. It is tuned to 63 Hz and is meant to be placed in o 90 corners. The principle used to develop the STAIDTREAT® BXA is exclusive to JOCAVI®.

It combines an ABS box, which has two appropriately enhanced closed resonance chambers inside, with mass and density components. These components have been specifically developed for this model.

Therefore, because of its careful development, this panel has become one of the best offers in the market for low-frequency absorbent materials. In order to boost bass absorption, we recommend that this panel is used together with the STAIDTREAT®BXW, as the latter functions close to the harmonics of this model.

Features:

• Tuned to 63Hz.
• Average absorption: 0.86 [>50Hz;<250KHz].
• Made of recyclable materials.
• Plate of pressed mineral granulate.
• Fire-resistance: M1.
• Application on ceiling and wall corners
• Package: 2 units.
• Installation: accessories included.
• Available in 5 colours.

The STAIDTREAT® BXW is a low-frequency absorbent panel. It is tuned to 125 Hz and is meant to be placed on walls or normal or T-type ceilings. It works when tuned to 125 Hz, in the first harmonic of the STAIDTREAT® BXA, thus exponentially boosting the absorption of basses when both panels are used together.

This tuned panel uses an open resonance chamber, which is combined with a membrane that was developed and calibrated to enhance its performance.

The visible outer plate is made of a porous and permeable mineral granulate which is highly absorbent in the medium and high frequencies, thus further widening the absorption range of this panel.

Features:

• Tuned to 125Hz.
• Average absorption: 0.83
[>50Hz; <250KHz].
• Made of recyclable materials.
• Plate of pressed mineral granulate.
• Fire-resistance: M1.
• Application on ceilings and walls.
• Package: 4 units.
• Installation: accessories included.
• Available in 5 colours.
The STAIDTREAT® WBA is a medium-frequency absorbent panel which is meant to be placed on walls or normal or T-type ceilings.

This absorbent panel has been developed by combining an adequately shaped high-density polyurethane foam box with a filling composed of a material that was exclusively manufactured for this panel in order to increase its sound absorption coefficient.

The outer finishing plate is made of a porous and permeable pressed mineral granulate, which is highly absorbent in the medium and high frequencies, thus making this panel very balanced as regards absorption/frequency.

Features:

• NRC : 0.66.
• Made of recycled materials.
• Plate of pressed granulated minerals.
• Fire-resistance: M1.
• Walls and T-ceilings ready applications.
• Package: 4 units.
• Installation: accessories included.
• Available in 5 colours.
 
Download specifications .pdf

see more ..
  Download specifications .pdf

see more ..
  Download specifications .pdf

see more .. .

back to top

Need help?

Contact us for a FREE Personalized Room Project. For bester results, please fill in the enclosed Consulting form, or contact your Panel Placement Specialist through info@jocavi.net or call +351 219243097, so that we can properly assist you. You can also simulate your music room by yourself using the online JAS Acoustic Simulator.